EBW MILLISECOND DELAY

This Exploding Bridgewire (EBW) Delay Initiator provides a detonator shock output similar to
RISI’s RP-2 EBW. All explosives in this initiator are approved in MIL-STD-1316 and 1911 as
allowable for inline applications. Delay times from 5 to 100 milliseconds may be obtained.
Depending on the version ordered, the initiator may be functioned with an EBW electrical pulse,
a Shock Tube or an Exploding Foil Initiator (EFI). Shown is the EBW version.

Applications • When a delay time from firing pulse to shock output in the range of 3 to 100 milliseconds is required • When primary explosives are not allowed or not wanted
Ordering For an EBW version use: ........ P/N 188-7414-1 For a Shock Tube Version use: P/N 188-7414-2 For an EFI Version use: ......... P/N 188-7414-3
Explosive Materials • 100 mg of PBX N5 • 80 mg of PBX 9407	Reactive Materials • Tungsten/Aluminum Thermite
Function Time • From 5 to 100 milliseconds • Must be specified at the time of order in 1.0 millisecond increments	Function Method • EBW pulse of 300 amps minimum within 1 microsecond